Installing a Brick Paver Walkway or White Bricks

The usage of Bricks or Pavers to create a pathway or patio area complements a house in a way that is unrivaled. In addition, setting up a Brick or Paver walkway does not necessarily need a pro.

The secret to installing a Brick or Paver Walkway is to first correctly prepare the location where the bricks/pavers are to be set up. In addition, string lines ought to be strung on each side of the pathway.
As soon as the location has actually been dug, 3/4" gravel stone need to be laid in and tamped down securely. 2" of sand, or stone dust must be spread out over the gravel. Once again the sand/stone dust must be tamped down. Stone dust is chosen. The height between the tamped down sand and the stringline should equate to the density of the brick or paver.

Now that you have a steady base, put a 1" pipe or ledger board the length of the sidewalk on either side of the pathway. Then using a flatedge, e.g. a 2"x4" board, slide it over the two lengths of the pipe/ledger board. In doing this you will create a level area to lay the bricks/pavers.

Now put on the level sand/stone dust strips of plastic brick borders. Set up an operate on both sides of the ready location. These strips will act as your sidewalk border and assistance to preserve the integrity and shape of the sidewalk. You can get these plastic strip borders at many house improvement shops. The strips need to be anchored down with 12" galvinized nails. You must sink these nails into the ground and through the strips every foot.

The secret to laying the bricks/pavers is to ensure that they interlock with each other. Always stagger surrounding rows of bricks by 1/2 of a brick to interlock them. This will again assist keep the integrity of the pathway.

Inevitably bricks/pavers will require to be cut or divided when constructing the pathway. To really cut/split the brick/paver, lay it in get more info a bed of sand and place the chisel at a 75 degree angle over the spot where you desire to break the brick. If your sidewalk has curves you will require to buy/rent a wetsaw.

After installing the bricks, develop the outside edges with extra sand, and after that shovel in the topsoil and pack down firmly.
Spread stone dust over the new sidewalk and sweep into the cracks. This will finish the interlocking of the bricks and help to remove any weed growth.


In addition, setting up a Brick or Paver walkway does not always need a pro. The key to setting up a Brick or Paver Walkway is to first effectively prepare the area where the bricks/pavers are to be set up. Now that you have a steady base, put a 1" pipeline or ledger board the length of the pathway on either side of the sidewalk. These strips will act as your walkway border and assistance to keep the stability and shape of the pathway. Undoubtedly bricks/pavers will need to be cut or split when constructing the sidewalk.

Leave a Reply

Your email address will not be published. Required fields are marked *